Yaesu FT-991 inputting the Manual Call Sign

Yaesu FT-991 Operating Manual (Page 11 of 155)

When turning on the power for the first time after purchase, or after resetting the transceiver, enter your own call sign.

The call sign will be displayed on the start screen when turning on the power and will be used to identify the station when sending messages during digital communication.

1. Press and hold the MENU(SETUP) button.
2. Touch [ MY CALL ] on the LCD.




Advice
The time duration of the initial call sign start upscreen display may be changed from the Menu item
"005 MY CALL INDICATION".

3. Touch a character key. The touched character will be displayed at the top of the screen. Enter each character of your call sign.

Advice
Up to 10 characters (letters, numbers, and symbols) can be entered.

4. Touch [ ENT ] on the LCD. The call sign setting is completed and the display will switch to the frequency display screen.


Yaesu FT-991(A) Users Group (groups.io)
https://groups.io/g/Yaesu-FT-991




Labels: , , ,

2 comments:

  1. Unknown3/27/2017

    Thank you ! Got mine with my QRZ.

    ReplyDelete
  2. Unknown3/10/2020

    What is the procedure to input a call sign after the initial call is put in, or the procedure to change a call sign?

    ReplyDelete

Thanks for your comments, Comments may take a day to show up

Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO

Yaesu FT-991(A) Users Group (groups.io)
https://groups.io/g/Yaesu-FT-991

www.FT991a.com
www.FTDX10.com
.

Note: only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)